dmesg - Intel Xeon E5420
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 21:02:49 UTC 2014
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (2493.80-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Family = 0x6 Model = 0x17 Stepping = 10
Features=0xbfebfbff
Features2=0xc0ce3bd
AMD Features=0x20000800
AMD Features2=0x1
VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16582766592 (15814 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 irqs 0-23 on motherboard
random: initialized
kbd1 at kbdmux0
acpi0: on motherboard
acpi0: Power Button (fixed)
cpu0: on acpi0
cpu1: on acpi0
cpu2: on acpi0
cpu3: on acpi0
cpu4: on acpi0
cpu5: on acpi0
cpu6: on acpi0
cpu7: on acpi0
attimer0: port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: port 0x70-0x73 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: port 0x588-0x58b on acpi0
pcib0: on acpi0
pcib0: Length mismatch for 3 range: c0000000 vs ffffffffc0000000
pci0: on pcib0
pcib1: at device 2.0 on pci0
pci16: on pcib1
pcib2: at device 0.0 on pci16
pci17: on pcib2
pcib3: at device 0.0 on pci17
pci19: on pcib3
pcib4: at device 1.0 on pci17
pci18: on pcib4
pcib5: at device 0.3 on pci16
pci20: on pcib5
pcib6: at device 3.0 on pci0
pci35: on pcib6
pcib7: at device 4.0 on pci0
pci7: on pcib7
pcib8: at device 5.0 on pci0
pci34: on pcib8
pcib9: at device 6.0 on pci0
pci3: on pcib9
pcib10: at device 0.0 on pci3
pci4: on pcib10
bce0: mem 0xc8000000-0xc9ffffff irq 18 at device 0.0 on pci4
miibus0: on bce0
brgphy0: PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Ethernet address: 00:21:5e:70:e0:38
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.6.1); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (ipms 1.6.0)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib11: at device 7.0 on pci0
pci2: on pcib11
aac0: port 0x4000-0x40ff mem 0xcce00000-0xccffffff,0xcafe0000-0xcaffffff irq 17 at device 0.0 on pci2
aac0: Enabling 64-bit address support
aac0: Enable Raw I/O
aac0: Enable 64-bit array
aac0: New comm. interface enabled
aac0: ServeRAID 8k-l , aac driver 2.1.9-1
pcib12: irq 16 at device 28.0 on pci0
pci5: on pcib12
pcib13: at device 0.0 on pci5
pci6: on pcib13
bce1: mem 0xce000000-0xcfffffff irq 16 at device 0.0 on pci6
miibus1: on bce1
brgphy1: PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Ethernet address: 00:21:5e:70:e0:3a
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.6.1); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (ipms 1.6.0)
Coal (RX:6,6,18,18; TX:20,20,80,80)
uhci0: port 0x2200-0x221f irq 23 at device 29.0 on pci0
usbus0 on uhci0
uhci1: port 0x2600-0x261f irq 22 at device 29.1 on pci0
usbus1 on uhci1
uhci2: port 0x2a00-0x2a1f irq 23 at device 29.2 on pci0
usbus2 on uhci2
ehci0: mem 0xf9000000-0xf90003ff irq 23 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib14: at device 30.0 on pci0
pci1: on pcib14
vgapci0: port 0x3000-0x30ff mem 0xd0000000-0xd7ffffff,0xdfff0000-0xdfffffff irq 22 at device 1.0 on pci1
vgapci0: Boot video device
isab0: at device 31.0 on pci0
isa0: on isab0
atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x480-0x48f at device 31.1 on pci0
ata0: at channel 0 on atapci0
uart0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: at iomem 0xc0000-0xcafff,0xcb000-0xcc7ff,0xcc800-0xcdfff,0xce000-0xd2fff on isa0
sc0: at flags 0x100 on isa0
sc0: VGA
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: at port 0x60,0x64 on isa0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: on cpu0
p4tcc0: on cpu0
est1: on cpu1
p4tcc1: on cpu1
est2: on cpu2
p4tcc2: on cpu2
est3: on cpu3
p4tcc3: on cpu3
est4: on cpu4
p4tcc4: on cpu4
est5: on cpu5
p4tcc5: on cpu5
est6: on cpu6
p4tcc6: on cpu6
est7: on cpu7
p4tcc7: on cpu7
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
aacd0 on aac0
aacd0: 279800MB (573030400 sectors)
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen1.1: at usbus1
uhub0: on usbus1
ugen0.1: at usbus0
uhub1: on usbus0
ugen3.1: at usbus3
uhub2: on usbus3
ugen2.1: at usbus2
uhub3: on usbus2
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1246899030 Hz quality 1000
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub2: 6 ports with 6 removable, self powered
Trying to mount root from zfs:zroot/ROOT/default []...
bce0: Gigabit link up!
Limiting closed port RST response from 752 to 200 packets/sec
Limiting closed port RST response from 956 to 200 packets/sec
pid 66966 (gcj-dbtool), uid 0: exited on signal 6 (core dumped)